Model：

VP-200A

Specification：

1. Working Voltage/Power：Single phase AC220V / 60Hz , Current 3A (Power 600W)
2. Seal parallel accuracy：± 10μm
3. Power：About 0.6KW
4. Vacuum Level：-92Kpa (Max)
5. Sealing Temperature：Normal temperature ~250℃，Provide independent control for the upper and lower heating dies
6. Temperatur Control Accuracy：±2℃
7. Edge Sealing Width：6mm
8. Sealing dimensions：Length Max 200mm (Width Max 150mm)、Thickness 2~6mm
9. Sealing Pressure：0~7Kg/cm2 Adjustable
10. Sealing Time：0~99 sec Adjustable
11. Air consumption：About 0.2L compressed air / per seal。
12. Net weight：About 52.5Kg
13. Product dimensions：
    Working Equipment：480mm*500mm*450mm
    Controller Dimensions：420mm*320mm*220mm
14. When vacuuming, the electrolyte must not leak out
15. Operating in the glove box.KF40 Feedthrough with all necessary wire and tube are included to allow operating inside Glove box, which has a KF40 port
16. After sealing, It must ensure that there is no leakage, with good conductivity and air tightness
17. The setting must be in the control box. During operation, the left and right buttons of the working part should be pressed simultaneously to avoid pinching hands and ensure safety
18. Sealing slope and height of the battery is adjustable
19. The battery must be sealed on three sides, including nickel and aluminum sheets, and must ensure no leakage