specializing in providing lithium battery laboratory equipments and materials - UBIQ Technology Co., Ltd.

Compact Vacuum Sealer

▶ Basic Specifications

Model:

VP-200A

Specification:

  1. Working Voltage/Power:Single phase AC220V / 60Hz , Current 3A (Power 600W)
  2. Seal parallel accuracy:± 10μm
  3. Power:About 0.6KW
  4. Vacuum Level:-92Kpa (Max)
  5. Sealing Temperature:Normal temperature ~250℃,Provide independent control for the upper and lower heating dies
  6. Temperatur Control Accuracy:±2℃
  7. Edge Sealing Width:6mm
  8. Sealing dimensions:Length Max 200mm (Width Max 150mm)、Thickness 2~6mm
  9. Sealing Pressure:0~7Kg/cm2 Adjustable
  10. Sealing Time:0~99 sec Adjustable
  11. Air consumption:About 0.2L compressed air / per seal。
  12. Net weight:About 52.5Kg
  13. Product dimensions:
    Working Equipment:480mm*500mm*450mm
    Controller Dimensions:420mm*320mm*220mm
  14. When vacuuming, the electrolyte must not leak out
  15. Operating in the glove box.KF40 Feedthrough with all necessary wire and tube are included to allow operating inside Glove box, which has a KF40 port
  16. After sealing, It must ensure that there is no leakage, with good conductivity and air tightness
  17. The setting must be in the control box. During operation, the left and right buttons of the working part should be pressed simultaneously to avoid pinching hands and ensure safety
  18. Sealing slope and height of the battery is adjustable
  19. The battery must be sealed on three sides, including nickel and aluminum sheets, and must ensure no leakage

Login

Login Success